This is your opportunity to purchase a Quality Brand New Instrument Cluster LCD W/Ribbon Cable. This is the part you need if you're attempting to fix your instrument cluster pixelation problem on your own. Be Advised this repair requires a lot of patience and fine attention to detail; irreversible damaged to your unit can occur. You will also need to purchase the T-Iron applicator or Tip Tool for a successful repair. No Instructions will be included.

 

To install this LCD, you must use the T-Tip with at least 40 Watt Iron. The T-Tip temperature must reach 100 degrees Celsius and pressure must be applied in order for the ribbon to heat seal the board properly. 

Installation instructions are not included!